There were entire generations of printers like Ultimaker based on laser cut plywood, but full wood was never in fashion. probably because it is not high-tech and not self-replicating.
I would like to see more projects with wooden parts. I like the texture and natural aesthetics of wood contrasted to technology.
Here are some designs that use wooden parts, some are fully functional, some are under development:
Wood frame Mendel90Mendel90 is great design and it is often built with wooden frame. One of the great success stories with wooden parts. Design is custimizable based on your input and generates paper printable cutting and drilling guides for the frame.
Adapto 3d printerIt can have aluminum beams and low cost wood frame.
Ikea RepRapWhile surfing around I found this reprap with wooden / particleboard frame (maybe made from Ikea furniture). Further information is unavailable. Let me know if you have any additional information about this printer.
Source: RepRap wiki
- Has a very low build cost (around $50USD), excluding the cost of the electronics.
- Does not require any bearings apart from the extruder.
- Can be constructed with only a hack saw, drill, screwdriver and epoxy resin adhesive.
- Has a larger build area as compared to the Mantis 9.1
- Due to its fold open construction it is easy to access for cleaning and changing tool heads.
- Uses a heated build chamber which has been seen to improve the quality of prints for large objects.
- Requires active thermal management in order to keep the extruder stepper motor at a safe operating temperature as its located in the heated build chamber.
- Due to the use of stainless steel sleeves instead of ball bearings, this design will ware slightly with time.
- Due to the design of the zaxis the gunstrap may not be able to achieve the same resolution as a Mendel.
- This design requires more parts to be fabricated than the original [[Mantis 9.1] in order to accommodated the heated build chamber.
- Requires the procurement of stainless steel shafts, stepper motors, belts, ect from old printers and scanners.
- Can not currently print any of its own parts.
Many bootstraped RepStraps are made from wood:
There is well documented Wolfstrap from Germany.
There are several other designs at:
World needs YOU to use more wood in 3d printing!
Links to other DIY 3d printer projects made from wood:
Here are some new Delta printers with wooden frames:
DeltaTrix with detailed build instructions:
Custom Delta made from Ikea furniture pieces:
Wood A-frame Mendel with very detailed construction guide:
Kiwi Remix delta: http://diy3dprinting.blogspot.com/2014/03/kiwi-remix-delta-3d-printer.html
Delta Twister, 400 USD low cost delta with no CNC or printed parts:
MSF is ultra low cots wooden Repstrap that can be made for 100 USD:
Very simple Repstrap with timber pieces and plywood frame, with only 3d printed extruder:
BYQ if Polish design of 3d printer made fully out of 8mm plywood with no 3d printed parts:
You can also make 3d printer enclosures from wood:
Qirky Bot has plywood base:
IcePick is a delta 3d printer that could theoretically also be pick-and-place robot for home manufacturing. It is make with no metal liner bearings or rods.
Steampunk style suitcase 3d printer based on Printrbot Go, with analogue gauges, handles and mechanical switches.
SmartCore simple, easy to make 3d printer with wood box frame:
TRINT plywood 3d printer (two different models):
Instructables guide on how to design wood frame 3d printer:
IKEA footstool made into a 3d printed based on Prusa i3: